Raven CR7 Operation Manual page 16

8. Press Next
will open.
9. Select Quick Start
that can be edited later. If desired, select Create Detailed Machine Configuration
to create a detailed machine configuration. After pressing Quick
Start, the Machine Configuration: Quick Start window will open.
NOTE: Selecting Quick Start only allows for the creation of basic guidance lines.
For additional functionality select Create Detailed Machine
Configuration.
10. If Quick Start was selected, enter the desired Guidance Width in feet or meters.
Guidance width is the width that will be displayed on the field computer.
NOTE: Guidance width is the width of the implement. This is used for creating
swath widths of guidance lines and is crucial for most field applications.
11. Press Accept
12. Read the information in the End User License Agreement window and press OK.
The Warning window will open.
13. Read and acknowledge the information on the Warning window. The Home
screen will open.
14. Refer to the appropriate sections in this manual to adjust the settings, start a job,
and perform other tasks on this screen.
NOTE: Press the Settings
Settings screen.
14
. The First Run Setup: Configure Machine Configuration window
to quickly create a simple machine configuration
. The End User License Agreement window will open.
button at any time it is visible to return to the