Cochlear Baha 5 Quick Manual page 2

Quick guide for Baha® 5 Sound Processor users
Cochlear™ Wireless TV Streamer
Using the Cochlear Wireless TV Streamer
Connecting the TV Streamer
to an analogue audio source
(e.g. TV or HiFi stereo).
A
Plug the stereo mini-jack on the
audio cable into the stereo mini-
jack input on the TV Streamer.
B
Plug the other end of the audio
cord into the "AUDIO OUT"
terminals on the audio source.
"AUDIO OUT" is usually marked
"L – R" for left and right, and is
normally located on the back of the
audio source.
Mini-jack input
Connecting the TV Streamer to a digital audio source
using the optical (Toslink) audio input.
A
Insert one of the plugs on the optical audio cable into the
optical audio input socket on the TV Streamer.
Note: Most optical cables are delivered with a small protective
cap to protect the tip of the plug. Please remove this protective
cap before inserting the cable.
B
Plug the other end of the optical audio cable into the
"Digital Audio Out/Optical" socket on your audio source.
Optical (Toslink) audio input
Connecting the TV Streamer to
an analogue audio source using
a headphone mini-jack adaptor.
A
Plug the stereo mini-jack on the
audio cable into the stereo mini-
jack input on the TV Streamer.
B
Connect the stereo mini-jack
adapter to the red and white plugs
at the other end of the audio cable.
C
Plug the stereo mini-jack
adapter into the audio source's
"HEADPHONE" output terminal.
Mini-jack input
Connecting the TV Streamer to a digital audio source
using the coaxial audio input.
A
Insert one of the plugs on the coaxial audio cable into
the coaxial audio input socket on the TV Streamer.
B
Plug the other end of the coaxial audio cable into the
"Digital Audio Out/ Coaxial" socket on your audio source.
Coaxial audio input
Connecting the TV Streamer to
an analogue audio source using
a scart adapter.
A
Plug the stereo mini-jack on the
audio cable into the stereo mini-
jack input on the TV Streamer.
B
Connect the scart adapter to the
red and white plugs on the other
end of the audio cable.
C
Plug the scart adapter into the
audio source's scart terminal.
Mini-jack input