Advertisement
This chapter explains how to use ADAM Ethernet I/O Utility to configure the ADAM-6000 modules for
various applications. Users can learn the hardware connection, software installation, communication
setting and every procedure for system configuration from these sections.
5-1 System Hardware Configuration
As we mentioned in chapter 3-1, you will need following items to complete your system hardware
configuration.
System Requirement
Host computer
IBM PC compatible computer with 486 CPU (Pentium is recommended)
-
Microsoft 95/98/2000/NT 4.0 (SP3 or SP4) or higher versions
-
At least 32 MB RAM
-
20 MB of hard disk space available
-
VGA color monitor
-
2x or higher speed CD-ROM
-
Mouse or other pointing devices
-
10 or 100 Mbps Ethernet Card
-
10 or 100 Mbps Ethernet Hub (at least 2 ports)
Two Ethernet Cable with RJ-45 connector
Power supply for ADAM-6000 (+10 to +30 V unregulated)
Make sure to prepare all of the items above, then connect the power and network wiring as figure 5-1.
Figure 5.1 Hardware Configuration
Advertisement
