Carton Inventory; Tools Required; Door Requirements - Merlin SilentDrive Elite myQ MR865MYQ Installation And Operating Instructions Manual

1

CARTON INVENTORY

1. Instruction manual (this document)
2. Stop collar
3. Clamp bracket, plates, washers (2) and nuts (2)
4. E138M wireless wall button (1)
5. E960M Premium+ transmitter (2)
6. Opener
7. Self tapping screws (2)
8. Weight bar screws (2), washers (2) and nuts (2)
9. Warning label and risk of entrapment label
10. Warranty registration card
11. Quick start guide
13. MyQ Gateway (includes power pack)
12. Weight bar
14. Safety Beams (includes 15 cable tie mounts)
Quick Start Guide
3

DOOR REQUIREMENTS

The SilentDrive Elite MyQ (MR865MYQ) is suitable for
spring balanced Residential Rolling garage doors with:
• Maximum door height of 4.5 m
• Maximum curtain area of 18 m
• Maximum door mass of 120 kg
*
The Protector System TM
installations and all other installations where the force at
the edge of the closing door exceeds 400 N (40 kgf).
Door axle diameter must not exceed 35 mm.
Ensure that there is at least 45 mm from the edge of the curtain to the edge of the bracket. If the roller door
drum wheel is on the edge of the curtain or is a smaller diameter, additional clearance may be required.
Assemble the opener to the door axle and the exisitng door bracket using the U clamp assembly provided.
Tighten to 25-28 Nm. Full installation procedure is in section 13.
2
must be installed for all myQ
2

TOOLS REQUIRED

1. Ladder
2. Adjustable wrench for U-bolts already installed
on the door
3. 8 mm socket, 10 mm socket and 13 mm extended
socket and socket wrench
4. 300 mm socket extension (for minimum side-room
installations)
5. Drill and 5.5 mm drill bit
6. Philips-head screwdriver
7. Marker pen
8. Door stand or similar device to safely support door
(not shown)
2
13 mm, 10 mm, 8 mm
8
5.5 mm
Minimum distance from
edge of curtain to edge of
door bracket 45 mm
95 mm