Save/Recall - Tektronix TDS3012C User Manual

Reference
repeatedly to choose one of the settings. The small arrow icon indicates
that there are additional settings available that are not shown.
You can use most of the front-panel controls at the same time you are
using a QuickMenu. For example, if you push a channel button to
select a different channel, the QuickMenu changes to show information
about that channel.
Using Other Menus.
you push the Meas button, you can set up and take automatic waveform
measurements in the usual way. If you return to the QuickMenu, the
measurement is still displayed on the screen.
Selecting Between QuickMenus.
modules installed that also have QuickMenu displays. To select the
QuickMenu you want to use, push the Menu screen button. This menu
item is shown only if application modules that contain a QuickMenu
are installed.

Save/Recall

Push the Save/Recall button to show the save/recall menu.
Bottom
Save
Current
Setup
Recall
Saved
Setup
Recall
Factory
Setup
102
You can still use the regular menus. For example, if
Side
To File
To Setup 1 ...
To Setup 10
From File
Recall Setup 1
... Recall Setup
10
OK Confirm
Factory Init
TDS3000C Series Oscilloscope User Manual
You may have optional application
Description
Saves a setup to a USB flash drive.
Saves a setup to nonvolatile memory.
Recalls a setup from a USB flash drive.
Recalls a setup from nonvolatile memory.
Initializes the setup.