Tektronix TDS3012C User Manual page 162

Reference
Bottom Side
Set Date & Display Date/Time
Time
Hour Min
Month Day
Year
OK Enter Date/Time
Battery
Power Off Time-Out
Time-Outs
Backlight Time-Out
TekSecure
Erase
Memory
Version
Key Points
Setting the Date and Time.
and time, push the Set Date & Time screen button. Use the general
purpose knob to set the values after you push the screen buttons for the
year, day and month, hour and minute. Push the OK Enter Date/Time
screen button to complete the operation.
Power Off Time-Out.
oscilloscope to standby if it is not being used. Use the general purpose
knob to set the power off time-out delay to a fixed time or to ∞ (time-out
off). Cycle the power switch to turn the oscilloscope back on after an
automatic shut down.
Power off time-out operates only when you use battery power.
134
Description
Use to turn the date/time display On or
Off.
Use to set the internal clock with the
current hour and minute.
Use to set the internal clock with the
current month and day.
Use to set the internal clock with the
current year.
Sets the date and time of the internal
clock.
Use to set the time before an automatic
shut down.
Use to set the time before the backlight
automatically turns off.
Erases all nonvolatile waveform and
setup memory. For more information,
refer to the TDS3000C Series Digital
Phosphor Oscilloscopes Declassification
and Security Instructions.
Use to see the firmware version.
To set the internal clock with the current date
Use this feature to automatically turn the
TDS3000C Series Oscilloscope User Manual