Important Safety Information; General Safety Summary - Tektronix TDS3012C User Manual

Important safety information

Important safety information
This manual contains information and warnings that must be followed
by the user for safe operation and to keep the product in a safe condition.
To safely perform service on this product, additional information
is provided at the end of this section. (See page viii, Service safety
summary.)

General safety summary

Use the product only as specified. Review the following safety
precautions to avoid injury and prevent damage to this product or any
products connected to it. Carefully read all instructions. Retain these
instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you
follow generally accepted safety procedures in addition to the safety
precautions specified in this manual.
The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should
remove the cover for repair, maintenance, or adjustment.
Before use, always check the product with a known source to be sure it
is operating correctly.
This product is not intended for detection of hazardous voltages.
Use personal protective equipment to prevent shock and arc blast injury
where hazardous live conductors are exposed.
When incorporating this equipment into a system, the safety of that
system is the responsibility of the assembler of the system.
To avoid fire or personal injury
Use proper power cord.
product and certified for the country of use.
Do not use the provided power cord for other products.
iv
Use only the power cord specified for this
TDS3000C Series Oscilloscope User Manual