Tektronix TDS3012C User Manual page 85

Running the Test.
follow these steps:
1. Display the signal, measurements, and menus as you want them
to appear in the screen images.
2. Push the hard copy button
3. Repeat step 2 every few minutes until you are finished with the test.
4. When you are finished, push Utility to see the list of sequential
files that have been saved.
The files are labeled with their sequential names, as well as the time
and date each was created.
Saving Waveform Data
You find another signal that you want to analyze with a spreadsheet
program back at the office. To save the waveform data on a USB flash
drive, follow these steps:
1. Display the signal on the oscilloscope screen.
2. Push the Save/Recall button.
3. Push the Save Waveform screen button.
4. Select To File.
TDS3000C Series Oscilloscope User Manual
To capture the control signal every few minutes,
.
Application Examples
57