I/O Range Setting - Sega Crazy Taxi High Roller Installation & Service Manual

6.3.4. I/O RANGE SETTING

Select I/O RANGE SETTING to display the following screen. Perform the volume settings for the units to be
used in the game. Use this mode when a control unit is not functioning properly or you want to change the
parameters. The three configurable items are the STEER SETTING (steering wheel), ACCEL SETTING
(accelerator), and BRAKE SETTING (brake).
-SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON-
Select SETUP with the SERVICE Button and press the TEST Button. The "SETUP EXIT" option
will appear. Here you may set the maximum and minimum values for each range.
1. Turn the handle all the way to the right to set the RIGHT MAX value.
2. Turn the handle all the way to the left to set the LEFT MAX value.
3. Press the accelerator all the way down to set the ACCEL SETTING MAX.
4. Press the brake all the way down to set the BRAKE SETTING MAX.
<Recommended values>
The values adjust the volume position to within a range of ± 04H.
After changing the settings, select "SETUP EXIT" and press the TEST Button to finish the I/O RANGE
SETTING adjustments.
Press the TEST Button when everything has been checked. You will return to the Game Test Menu screen.
□ Crazy Taxi HighRoller ■
[GAME TEST MENU -RANGE SETTING]
WHEEL SETTING AD
LEFT MAX **H ←→RIGHT MAX **H
ACCEL SETTING AD
MIN **H ←--→ MAX **H
BRAKE SETTING AD
MIN **H ←--→ MAX **H
SETUP
→EXIT
● Steering Wheel: Centered (straight)...
● Accelerator: When released ......
● Brake: When released ......
74
: **H
0
: **H
1
: **H
1
80
30
30