Before Using This Product - Sega Crazy Taxi High Roller Installation & Service Manual

1.

BEFORE USING THIS PRODUCT

To ensure the safe usage of the product, be sure to read the following before using the product. The
following instructions are intended for the use of QUALIFIED SERVICE PERSONNEL ONLY. After carefully
reading and sufficiently understanding the instructions should any activity be carried out on the product. Only
qualified service personnel should carry out maintenance on the product.
Terms such as WARNING!, CAUTION, and IMPORTANT! Are used where an explanation is given which
requires special attention, depending on the potential risk. SEGA is not responsible for injury or damage
caused by use in a manner contrary to the instructions stated in this document. In order to prevent accidents
warning stickers and printed instructions are applied in the places where a potentially hazardous situation
relating to the product could arise. Be sure to comply with these warnings.
Indicates that mishandling the product by
disregarding this warning will cause a potentially
hazardous situation, which can result in death or
serious injury.
This is cautionary information that should be complied with when handling the product. Indicates that
mishandling the product by disregarding this will cause a potentially hazardous situation that may not result
in personal injury but could damage the product.
Be sure to turn off the power and disconnect from the mains supply before working on the machine.
Ensure that the correct fuse(s) is fitted to the machine.
Details of the correct fusing of the machine are enclosed in the Service Manual.
Ensure that only qualified Service Engineers perform any maintenance work on the machine.
Specification changes, removal of equipment, conversion and/or addition, not designated by SEGA are not
permitted and will invalidate this product's CE conformity.
The parts of the product also include any warning labels or safety covers for personal protection etc. A
potential hazard will be created if the machine is operated while any parts have been removed. Should any
doors, lids or protective covers be damaged or lost, do not operate the product. SEGA is not liable in any
whatsoever for any injury and/or damage caused by specification changes not designated by SEGA.
Before installing the product, check for the Electrical Specification Sticker, SEGA products have a sticker on
which the electrical specifications are detailed. Ensure that the product is compatible with the power supply
voltage and frequency requirements of the location in which the machine is to be installed.
Install and operate the machine only in places where appropriate lighting is available, allowing warning
stickers to be clearly read.
To ensure maximum safety for both customers and operators, stickers and printed instructions describing
potentially hazardous situations are applied to places where accidents could occur. Ensure that where the
product is operated has sufficient lighting to allow any warnings to be read. If any sticker or printed warning
is removed or defaced, do not operate the machine, until it has been replaced by an identical item.
When handling the monitor, be very careful. (Applies only to product with monitor)
Indicates that mishandling the product by
disregarding this caution will cause a potentially
hazardous situation, which can result in personal
injury and or material damage.
3