Linking Function - Riello RiCloud User Manual

3.13

Linking function

RiCLOUD linking with the WiFi Box
RiCLOUD and the WiFi Box in the WiFi
RiCLOUD package are already linked.
If installing an additional RiCLOUD,
follow the procedure below.
Ensure that RiCLOUD and the WiFi Box
are connected to a power source and
there are no alarms.
Press the prismatic dome clear LED
button (A) and hold for 5 seconds
until the green and red LEDs flash
slow (1 sec) at the same time (once
linked the flash will return to normal).
WiFi Box
From RiCLOUD HOME screen, press
the ESC/MODE button and hold for
5 seconds to display the following
(alternating) information.
EXAMPLE OF LINKED RICLOUD
2
1
1
2
3
EXAMPLE OF LINKED RICLOUD
4
A
4
To complete the link, press the SET/
PROGRAM button or wait for RiCLOUD
to return to the HOME screen.
9
Should the link not be successful,
please contact the Authorised Service
Centre.
86
Radio frequency channel
Receiver (WiFi Box) number
Radio frequency address
Transmitter number (RiCLOUD)
This may take
minutes, after which RiCLOUD
automatically returns to the
HOME screen.
3
up to 2