Table of Contents
Advertisement
2.2
Practical installation
diagramspage
See practical installation diagrams on
page 192.
2.3
Technical Data
See page 210.
2.4
Three-phase installation
Preparation
Before installing the device
Check
that
the
compatible with the boiler (see boiler
installer manual).
The wireless RiCLOUD thermostat
can be installed anywhere, however
the most suitable place should
be chosen taking into account the
following:
− Avoid draughts (A).
− Do not install above sources of
heat (B).
− Avoid direct sunlight (C).
− Position at the appropriate
height (D).
A
C
thermostat
is
B
1,5m
D
Wireless
installation
require any wiring, making the
process very simple.
RiCLOUD thermostat can also be
installed with wiring, to replace
any existing thermostat, provided
compatibility is checked in advance.
Before installing the boiler control
unit (WiFi Box), disconnect the boiler
from the power supply.
Installation
The following tools are required:
− Phillips screwdriver
− Small slotted screwdriver
− Pliers and wire strippers
Installing RiCLOUD
Remove RiCLOUD from its base;
Fix RiCLOUD base to the wall or
electrical
box
provided, use the optics level in the
plastic wrapping to install RiCLOUD
horizontally.
Using
screws
PROVIDED may compromise the correct
closure of the plastic. Make sure that
the screw head is correctly inserted in
the hole.
58
does
not
using
the
screws
other
than
those
Hide quick links:
Advertisement
Table of Contents
