Riello RiCloud User Manual page 17

If you need to link other thermostats
and/or boiler RF receivers to the
WiFi Box via radio frequency, press
the clear button on the WiFi Box for
5 seconds until the LEDs flash at the
same time and set the device to be
linked to the same operating mode
(see "3.13 Linking function" page
86). After making these links, the
system automatically resumes normal
operation.
Link you home modem password to
the WiFi Box via one of the following
methods.
9
Smartphones or tablets must be
connected to the WiFI network
that will be matched to the WiFi
Box.
Smart Link
− Press the Smart Link button
on the WiFi Box once with an
appropriate implement.
− The green and red LEDs start
flashing frequently.
− Select the "Configure WiFi"
field from the drop-down
menu in the APP , insert your
home modem password and
press the "Connect" button.
The process is complete if the APP
displays the message "Connection
complete".
9
Once online, the system requires
up to 4 minutes to auto-configure.
WPS (only for modems with this
function)
− Set your home modem to
WPS mode.
− Press the WPS button on the
WiFi Box using an appropriate
implement and hold for 5
seconds until the red and
green LEDs flash frequently.
The link has been made if the red LED
on the WiFi Box flashes frequently
after a few seconds.
9
Once online, the system requires
up to 4 minutes to auto-configure.
Restart the WiFi router after the
operation is completed.
NOTE
For further information, please see
RiCLOUD APP manual.
64