Riello RiCloud User Manual page 35

Parameter Description
13 CALI
Correction of the temperature detected by
RiCLOUD room probe.
The value can be set with a hysteresis of
+-7°C.
14 FACt
Restore factory settings.
The value can be set from 0 to 1.
By setting this parameter to 1, RiCLOUD values
are restored to the default setting, excluding
the date and time and the domestic hot
water temperature.
16 SOFt RiCLOUD software version.
Read-only parameter.
17 dEgr
Setting the unit of measure.
The value can be set to °C or °F .
The default setting is °C (degrees Centigrade).
This parameter allows you to set and view
temperatures on the degrees Centigrade or
degrees Fahrenheit scale.
82