Setting The Heating/Cooling Time Program In Automatic Operating Mode - Riello RiCloud User Manual

function (if
available between the WiFi Box and
the boiler or the RF receiver and the
boiler or RiCLOUD and the boiler, if
provided for by the OTBus protocol).
If the rIE alarm is quickly flashing (0,5
sec) on the HOME screen in the room
temperature field,
press the ESC/MODE button and hold
for 5 seconds to start semi-automatic
filling (the message rIE will stop
flashing and remain on).
When releasing the button ESC/MODE
the rIE message starts flashing slowly
(2 secs) until the end of the function.
Once the system pressure has been
restored, RiCLOUD
returns to the normal HOME screen
display.
9
If the SEMI-AUTOMATIC FILLING
function is not carried out
within 90 seconds, the rIE alarm
flashes quickly (1sec.) and is
displayed on the HOME page
again.
OTBus connection
automatically
3.6.4 KEY-LOCK function
To enable/disable
function, press the FORWARD > and UP
^ buttons together for 5 seconds from
the HOME page (if enabled, LOC will be
displayed for 5 seconds, if disabled,
UnL will be displayed for 5 seconds).
3.7 Setting the heating/
cooling time program
in automatic operating
mode
From the HOME screen, press the SET/
PROGRAM button to open the user
menu.
Press the FORWARD
to select the field HEATING/COOLING
TIME PROGRAM
Press the SET/PROG button to set.
70
the KEY-LOCK
or BACK button
.