SECTION 1 – Installation
Contents of Packaging
1.
2.
3.
4.
5.
6.
7.
8.
9.
Before using Printer:
•
Choose a location for Duplex Printer
•
Unpack and assemble Duplex Printer
•
Remove Print Engine Transport Locks
•
Remove Service Station Transport Tab and Shipping Tape
•
Install Adapter Feet on Top Printer
•
Install Top Printer on Bottom (Duplex) Printer
•
Plug in Printer and connect it to computer or network
•
Update/Install Firmware and Printer Driver on Top Printer
•
Set up Top and Duplex Printer communication
•
Install Ink Tanks
•
Install Printhead
•
Set up feed on Printer
Choose a Location
Position Duplex Printer at least 9" from any walls. Use the Bubble Gauge mounted on Print Engine
(or a small level) to make sure Duplex Printer is level. Protect Printer from excessive heat, dust, and moisture.
Avoid placing it in direct sunlight.
Unpack and Set-up
Remove Duplex Printer and parts from carton. Remove all packing tape.
Duplex Printer
Ink Tanks – Cyan, Magenta, Yellow, Black, Black
Printhead Cartridge
Envelope Attachment Spacers (pkg. of 2)
AC Power Cord
Ethernet Cable (to connect Top Printer and Duplex Printer)
Adapter Feet for Top Printer (pkg. of 2)
Operator Manual
Driver Software CD
SECTION 1
INSTALLATION
1