Figure 38: Bios Advanced Menu - Fia Hsio12 Configuration - Kontron mITX-DNV User Manual

Figure 38: BIOS Advanced Menu - FIA HSIO12 Configuration

Main Advanced
Flexible I/O Adapter HSIO12 Configuration
HSIO12 I/O amount
Lane 8:PCIE-C6139(VGA)
Lane18:XHCI
Lane 0:PCIE-Soltx1
Lane12:I210-AT-1
Lane14:I210-AT-2
Lane10:mPCIE1/mSATA1
Lane19:M.2 Key-B
Lane 9:SATA1
Lane11:SATA2
Lane13:SATA3
Lane15:SATA4
Lane16:SATA5
Lane17:SATA6
mPCIE1 W-DISABLE# Pin
Feature
Lane 8:PCIE-
C6139(VGA)
Lane18:XHCI
Lane 0:PCIE-Soltx1
Lane12:I210-AT-1
Lane14:I210-AT-2
Lane10:mPCIE1/mSAT
A1
Lane19:M.2 Key-B
Lane 9:SATA1
Lane11:SATA2
Lane13:SATA3
Lane15:SATA4
Lane16:SATA5
Lane17:SATA6
mPCIE1 W-DISABLE#
Pin
www.kontron.com
BIOS SETUP UTILITY
Power
Full Avtive
[PCIE Enabled]
[XHCI Enabled]
[Lane Disabled]
[PCIE Enabled]
[PCIE Enabled]
[JP1 with mPCIE]
[SATA Enabled]
[SATA Enabled]
[SATA Enabled]
[SATA Enabled]
[SATA Enabled]
[SATA Enabled]
[SATA Enabled]
[Enabled (Driven High)}
Version 2.19.1266. Copyright (C) 2018, American Megatrends, Inc.
Option Description
[Lane Disabled], [PCIE Select Lane 8 to work as Disabled or PCIE-C6139(VGA).
Enable]
[Lane Disabled], [XHCI Select Lane18 to work as Disabled or XHCI.
Enabled]
[Lane Disabled], [PCIE Select Lane 0 to work as Disabled or PCIE-Solt.
Enabled]
[Lane Disabled], [PCIE Select Lane12 / Lane14 to work as Disabled or I210-AT-1 / I210-
Enabled] AT-2 respectively.
[Lane Disabled], [PCIE Select Lane10 to work as Disabled, mPCIE1 or mSATA1.
Enable], [SATA
Enable], [JP1 with
mPCIE]
[Lane Disabled], Select Lane19 to work as Disabled or M.2 Key-B.
[SATA Enabled]
[Lane Disabled], Select Lane 9 / Lane11 / Lane13 / Lane15 / Lane16 / Lane17 to
[SATA Enabled] work as Disabled or SATA1 / SATA2 / SATA3 / SATA4 / SATA5 /
SATA6 respectively.
[Disabled (Driven Select to control mPCIE1 W-DISABLE# signal Pin status. This
Low)], [Enabled signal is used by the system to control radio operation on add-in
mITX-DNV - User Guide, Rev. 1.0
Boot Security
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Save & Exit
// 63