Installation Procedure - YASKAWA PG-X3 Installation Manual

5 Installation Procedure

5 Installation Procedure
◆
Section Safety
Do not connect or disconnect wiring while the power is on.
Before wiring terminals, disconnect all power to the equipment. The internal capacitor
remains charged even after the power supply is turned off. After shutting off the power,
wait at least the amount of time specified on the drive before touching any components.
Do not remove the front cover of the drive while the power is on.
Failure to comply could result in death or serious injury.
The diagrams in this section may include options and drives without covers or safety
shields to show details. Be sure to reinstall covers or shields before operating any devices.
Use the option according to the instructions described in this manual.
Do not allow unqualified personnel to use equipment.
Failure to comply could result in death or serious injury.
Maintenance, inspection, and replacement of parts must be performed only by authorized
personnel familiar with installation, adjustment, and maintenance of this product.
Do not touch circuit boards while the power to the drive is on.
Failure to comply could result in death or serious injury.
10
DANGER
Electric Shock Hazard
W ARNING
Electrical Shock Hazard
YASKAWA ELECTRIC TOBP C730600 37B 1000-Series Option PG-X3 Installation Manual