Table of Contents
Advertisement
Control & Connector Identification
AEMC
I N S T R U M E N T S
4
Ñ LINE
3
2
660V max.
V
OFF
Ω
ON
1
!
PUSH AND TURN
TO LOCK "ON"
1. PUSH-TO-TEST button:
Lock "ON" by turning button a quarter turn to the right.
OFF Position: Voltmeter position.
ON Position: Test position with voltage present at outputs.
2. EARTH terminal (green):
Connects to ground for insulation testing.
3. GUARD terminal (blue):
Used to minimize the effect of leakage current.
4. LINE terminal (black):
Connects to the equipment to be tested.
5. High Voltage Indicator:
Red light blinks when the measurement voltage is on the output
terminals. An audible "beep" is also emitted approx. every 6
seconds.
6. Battery Low Indicator:
Light OFF: battery good
Light ON: battery partially discharged. (Measurements possible for
20-60 minutes depending on voltage selection. Clock and voltmeter
still operational).
5
MEGOHMMETER MODEL 5100
GUARD
+ EARTH
15
Megohmmeter Models 5000N/5100/5110
6
7
LOW
CHARGING
– +
14
- 17 -
8
9
50/60/400Hz
!
110V
5
CLOCK / TIMER
RESET
12
13
10
11
Advertisement
Table of Contents
