Control And Connector Identification - AEMC 1000N User Manual

&RQWURO &RQQH.WRU,GHQWLIL.DWLRQ
1. Analog Measurement Scale
2. Battery Power Indicator:
Green lamp ON indicates batteries are good when PUSH-TO-TEST
button is depressed. Audible "beep" is also emitted approximately
every 6 seconds.
3. Mechanical Zero Adjust
4. Selection Switch
5. GUARD terminal (blue):
Used to minimize the effect of leakage current.
Also used for the 10Ω range.
6. LINE terminal (black):
Connects to the equipment to be tested.
7. EARTH terminal (green):
Connects to ground for insulation testing.
8. PUSH-TO-TEST button
Lock "ON" by turning button a quarter turn to the right.
OFF Position: Voltmeter position
ON Position: Test position with voltage present at outputs
OFF
V
ON
8
TURN TO
LOCK
!
7
+ EARTH
V
GΩ
MΩ
kΩ
6
- LINE
Megohmmeter Model 1000N/1100N
Bat.
5
MEGOHMMETER
MODEL 1000N
- GUARD
- 9 -
1
2
3
4
5
Ω