Control & Connector Identification
1
2
3
1. PUSH-TO-TEST button
Lock "ON" by turning button a quarter turn to the right.
OFF Position: Voltmeter position
ON Position: Test position with voltage present at outputs
2. EARTH terminal (green)
Connects to ground for insulation testing.
3. LINE terminal (black)
Connects to the equipment to be tested.
4. Analog Measurement Scale
5. Battery Power Indicator
Green light ON indicates that the batteries are good when the
PUSH-TO-TEST button is depressed. Audible "beep" is also
emitted approx every 6 seconds.
6. Mechanical Zero Adjust
7. Selection Switch
8. GUARD terminal (blue)
Used to minimize the effect of leakage current.
Megohmmeter Models 5000N/5100/5110
OFF
V
ON
TURN TO
LOCK
!
+ EARTH
V
GΩ
MΩ
kΩ
- LINE
Bat.
5
MEGOHMMETER
MODEL 5000N
- GUARD
- 9 -
4
5
6
7
8