Printer Configurations - Lexmark B2865 User Manual

Learning about the printer
•
Keep the printer:
–
Clean, dry, and free of dust.
–
Away from stray staples and paper clips.
–
Away from the direct airflow of air conditioners, heaters, or ventilators.
–
Free from direct sunlight and humidity extremes.
•
Observe the recommended temperatures and avoid fluctuations:
Ambient temperature 10 to 32.2°C (50 to 90°F)
Storage temperature -40 to 43.3°C (-40 to 110°F)
•
Allow the following recommended amount of space around the printer for proper ventilation:
1 Top
2 Right side 152 mm (6 in.)
3 Front
4 Left side
5 Rear
Printer configurations
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see www.lexmark.com/multifunctionprinters.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding optional 250‑, 550‑, or 2100‑sheet trays. For more information, see
"Installing the 250‑ or 550‑sheet tray" on page 196
152 mm (6 in.)
406 mm (16 in.)
Note: The minimum space needed in front of the printer is 76 mm (3 in.).
152 mm (6 in.)
152 mm (6 in.)
or "Installing the 2100‑sheet tray" on page
11
197.