Menu Item "Pwm; Fig. 6-6: Pwm: Configuration - Addi-Data MSX-E1701 Technical Description
Ethernet multifunction counter system
Hide thumbs
Also See for MSX-E1701:
- Quick installation (8 pages) ,
- Manual (51 pages) ,
- Manual (47 pages)
Table of Contents
Advertisement
Web interface: Quick access to the MSX-E system
MSX-E1701
6.1.4 Menu item "PWM"
Fig. 6-6: PWM: Configuration
This menu item is only available in the system version containing PWM outputs.
In the area "PWM signal configuration", you can set the following parameters:
time base, level times, start level, external gate and filter value of input C.
The stop mode and the level state of the signal after a stop command have to be defined in the area
"Stop mode configuration".
In the area "Options configuration", you have the possibility to select the source of the synchro trigger
and to activate the data server.
www.addi-data.com
29
Advertisement
Table of Contents
Need help?
Do you have a question about the MSX-E1701 and is the answer not in the manual?