Pop-Up Message List - Epson PP-100II Technical Reference Manual

Pop-up Message List

Icon
Message
Set the monitoring folder.
The path specified for the EPSON Total Disc Setup working folder does
not exist or you do not have access to it.
Start EPSON Total Disc Setup and specify the working folder again, or
set up the access privileges.
There is insufficient remaining space for the EPSON Total Disc Maker
working folder (working folder path).
After changing the working folder or obtaining the available space, click
OK.
Clicking Cancel cancels publishing, and exits TD Bridge.
The printer driver has not been set, or it cannot be found.
Set a printer driver to use with Total Disc Setup and click OK.
Clicking Cancel cancels publishing, and exits TD Bridge.
The PC is running in battery mode.
If the battery runs out during publishing, the disc may not be created
correctly.
Switch to AC mode and click OK.
Clicking Cancel cancels publishing, and exits TD Bridge.
The process cannot be performed because there is no XML parser, or it
is not installed correctly.
Install an XML parser correctly and click OK.
Clicking Cancel cancels publishing, and exits TD Bridge.
The monitoring folder does not exist or you do not have access to it.
Set the monitoring folder.
The monitoring folder does not exist or you do not have access to it.
Log on to Windows using an administrator account and set the
monitoring folder.
The settings of the default output device are invalid.
Change the settings to a valid output device.
Cannot publish because the file system of the drive where the EPSON
Total Disc Maker working folder is does not support the file size of the
write data.
Specify a folder formatted with NTFS for the working folder.
Clicking Cancel cancels publishing, and exits TD Bridge.
Cannot get the supported version information.
Reinstall TD Bridge.
The settings of the default output device are invalid.
Log on to Windows using an administrator account and change the
settings to a valid output device.
The monitoring folder is set to a folder which cannot be written to using
a limited account.
Change it to a folder which can be written to using a limited account.
Chapter 4 Development Guide for a Cooperative Application
Icon Button
! OK Clicked [OK] in the environment settings screen without
specifying a monitoring folder.
! OK The path specified for the EPSON Total Disc Setup
working folder does not exist or you do not have access
to it.
! OK Space in the working folder for EPSON Total Disc Maker is
Cancel not sufficient when a job is issued.
! OK The printer driver cannot be found when a job is issued.
Cancel
! OK The computer is using a battery power source when a
Cancel job is issued.
! OK XML parser is not installed when a job is issued.
Cancel
! OK The monitoring folder cannot be found or you do not
have access to it when handling files while logging on to
Windows with an administrative account.
! OK The monitoring folder cannot be found or you do not
have access to it when handling files while logging on to
Windows with a limited account.
! OK The output device is invalid when starting up TD Bridge
while logging on to Windows with an administrative
account.
! OK Write data is 4GB or more; the disc format does not
Cancel support 4GB-writing.
! OK The supported version information for Total Disc Maker
cannot be acquired when starting up TD Bridge.
! OK The output device is invalid when starting up TD Bridge
while logging on to Windows with a limited account.
! OK The monitoring folder's improper setting is detected
when starting up TD Bridge while logging on to
Windows with an administrative account.
Message
Button
Cause
4
99