Epson PP-100II Technical Reference Manual page 46

Key
Explanation
name
CLOSE_DIS Specify whether to
C close (finalize) the
burnt disc.
(*1)
FORMAT Specify a disc format
when creating a
data disc.
(*1)
DATA Specify folders and
files to be written to
the data disc.
DATA_LIST When specifying
(*1)
write data using a
file list, specify the
directory path to the
file list file.
VOLUME_L Specify a Volume
(*1)
ABEL Label of the data
disc.
(*2)
VIDEO When burning Video
CDs, specify the
directory path to the
video file to be set as
video track.
When burning DVD-
Video, specify the
directory path to the
VIDEO_TS folder.
VIDEO_TITL Specify a video title
(*2)
E to configure the
video title for a
Video-CD or a DVD-
Video.
46
How to specify the setting
Specify "YES" when closing the disc after
burning.
Specify "NO" when not closing the disc after
burning.
If not specified, the disc will be closed. This
setting cannot be applied to DVD+R DL and
DVD-R DL (ignored when any of the disc types
has been selected).
[When the disc type is CD]
Specify "ISO9660L2" when creating the
CD in ISO9660 Level 2 format.
Specify "JOLIET" when creating the CD in
Joliet format.
Specify "UDF102" when creating the CD
in UDF1.0.2 format.
When not specified, the CD is burnt in
ISO9660 Level 2 format.
[When the disc type is DVD]
Specify "UDF102" when creating the DVD
in UDF1.0.2 format.
Specify "UDF150" when creating the CD
in UDF1.5.0 format.
Specify "UDF102_BRIDGE" when creating
the DVD in UDF1.0.2 + UDF Bridge
format.
When not specified, the DVD is burnt in
UDF1.0.2 + UDF Bridge format.
[When the disc type is BD]
Specify "UDF102" when creating the BD
in UDF1.0.2 format.
Specify "UDF260" when creating the BD
in UDF2.60 format.
When not specified, the BD is burnt in
UDF 2.60 format.
When creating data discs, specify the
directory path to the source file and that to
the destination.
The directory path to the source file must be
the path from the computer on which TD
Bridge installed.
(For explanation on the directory path to the
destination, see "Creating Data Discs -
Specifying write data file/folder".)
The directory path must be the path from the
computer on which TD Bridge is installed.
(For explanation on the directory path to a
source file specified in the file list file, see
"Creating Data Discs - Specifying write data
file/folder".)
Specify a Volume Label to set the volume
label to the data disc.
The directory path must be the Video file path
or the VIDEO_TS folder path from the
computer on which TD Bridge is installed.
When burning Video CDs, specify "CD" for
"DISC_TYPE," and when burning DVD-Video,
specify "DVD" or "DVD-DL" for it.
When "DATA" or "DATA_LIST" has been
specified, this setting becomes invalid.
(ignored if the setting is made)
Specify a character string for the video title of
the Video-CD or the DVD-Video.
When "DATA" or "DATA_LIST" has been
specified, this setting becomes invalid.
(ignored if the setting is made)
Available
Maximum
characters
characters
(strings)
Three "YES" or "NO" Arbitrary
characters
13 characters Any of Arbitrary
"ISO9660L2",
"JOLIET",
"UDF102",
"UDF150",
"UDF102_BRIDGE
",
"UDF260"
511 characters See "Recording Arbitrary
Formats and
Restrictions" on
page 4-50 for the
details.
255 characters Characters valid Arbitrary
as a directory
path
*4 *4 Arbitrary
255 characters Characters valid Arbitrary
as a directory
path
32 characters Video-CD: Arbitrary
English one-byte
uppercases, one
byte numerical
characters, "_"
DVD-Video:
One-byte
numerical
characters, "_"
Except PP- PP-100AP
Necessary/ 100AP, Key Key
Arbitrary available available
Yes/No Yes/No
●
--
●
--
●
--
●
--
●
--
●
--
●
--