Epson PP-100II Technical Reference Manual page 80

Section name Key name
PUBLISHER[N] DRIVE1_PROGRESS
DRIVE2_PROGRESS
COMPLETE_DISC_COP
IES
USB_CONNECTION_M
ODE
TDB_INFO TDB_ID
VERSION
*1 These keys are not written on the lists when the JDF file was not accepted or when publishing has not been completed.
*2 "0" indicates that the ink cartridge needs to be replaced.
*3 When the user cancel a job, "4" is set even if no disc is published yet.
*4 When an error occurs, "5" is set even when discs are already published and the COMPLETION_NUMBER is more than 1.
*5 The content of a warning can be checked in Total Disc Monitor.
*6 For the details on plug-ins, see "Total Disc Maker Plug-in Technical Reference Guide".
80
Explanation
The progress status (%) of the drive 1 of
the device is output.
The progress status (%) of the drive 2 of
the device is output.
The total number of published discs is
output.
The connection mode of the USB cable
connecting the host computer and the
relevant device together is output.
This item is output in PP-100II only.
A unique value identifying the currently
used TD bridge is output.
The TB Bridge version will is output.
Output values that indicate
status
Writing, verifying write, or measuring the
error rate: "0" to "100"
(Separate progress status is output.)
Other than writing, verifying write, or
measuring the error rate: "0"
Unknown: "-1"
Writing, verifying write, or measuring the
error rate: "0" to "100"
(Separate progress status is output.)
Other than writing, verifying write, or
measuring the error rate: "0"
Unknown: "-1"
Number of the discs published
Unknown: "-1"
USB3.0: "1"
Other than USB3.0: "0"
TD Bridge identifier
TB Bridge version
Change
timing
When the operation
progress status of
the drive 1 is
changed
When the operation
progress status of
the drive 2 is
changed
When the disc is
ejected
When the device is
connected
No change
No change