Care & Cleaning; Descaling - Sage Precision Brewer SDC400 Quick Manual

Care &
Cleaning
Always turn the coffee machine off and remove the
plug from the power outlet before cleaning.
CLEANING THE OUTER HOUSING
The outer housing and LCD screen can be
cleaned with a soft, damp cloth. Apply cleaner to
the cloth and not the LCD surface. Polish with a
soft, dry cloth. Cleaning and drying with dry paper
towels or abrasive cloths and cleaners may scratch
the surface.
CLEANING THE COFFEE BASKET
AND MESH BASKET FILTER
Remove the coffee basket. Discard any ground
coffee and filter paper. The coffee basket and
mesh basket filter can be rinsed under running
water. Ensure the fine holes of the mesh basket
filter are clear. For a deeper clean, wash the coffee
basket and mesh basket filter in warm, soapy water
with a soft bristled brush.
CAUTION
The coffee basket, mesh basket or paper filter
may still be very hot after brewing. Use caution and
allow to cool before removing.
CLEANING THE CARAFE
After each use, empty the carafe. Do not let brewed
coffee stand overnight as this can cause the carafe
to stain. Rinse the carafe and carafe lid under warm
running water. For a deeper clean, we recommend
regularly washing the carafe in warm, soapy water
using a soft bristled brush. Do not use abrasive
cleansers, pads or cloths which can scratch the
surface. Rinse and dry thoroughly.
CLEANING THE SHOWERHEAD
Simply wipe down the showerhead area
periodically. However, if a more thorough clean
is required, the Showerhead can be removed by
unlocking the Showerhead Ring. Rotate clockwise
then remove the Showerhead for cleaning. Once
complete, reinstall the Showerhead.

DESCALING

After regular use, hard water can cause mineral
build up in internal components, reducing the
brewing flow, brewing temperature, power of the
machine, and taste of the coffee.
We recommend to descale regularly. When LCD
shows "DESCALE" (flashing), descaling cycle
is needed.
NOTE
It takes approximately 15 minutes to complete
descaling cycle.
1. Empty the tank. Prepare a descale solution in
accordance with manufacturer's instructions.
Pour this solution into the empty water tank.
2. Place the basket and the carafe into position
under the drip stop outlet (Ensure the carafe
is empty and the lid is securely locked).
3. Press SELECT button for 3 seconds to start
descaling cycle. LCD with show "dSL"
for 1 second and then tell remaining time
of descaling cycle.
4. When the descaling process is finished, the
LCD screen will go back to the main menu.
To completely remove residual water in the
tank, invert the machine and brew with fresh
water twice. Discard the water from the carafe
and rinse thoroughly.
NOTE
We recommend to brew through again after
descaling to brew out the residue descale solution.
NOTE
You cannot stop the descaling process mid cycle.
Force stop by unplugging the cord from the
power outlet.
EN
13