Aspirating Smoke Detector
6.5
Air Filter
6.5.1
Installing the Air Filter Box
Figure 6.1: Boring distances of holes in base of FAS‑ASD‑WS air filter box
Filter box
–
–
–
–
Installation material
Cylinder or flathead screws are suitable for wall mounting:
–
–
6.5.2
Filter Change on the Air Filter Box
Changing the filter inserts (in fig.: FAS‑ASD‑FL Filterbox Large)
To replace the filter inserts, proceed as follows:
Bosch Sicherheitssysteme GmbH
90
To use the filter box in the pipe system, use the two PG29 filter screw connections
supplied.
Install these cable glands in precisely the same way as for the pipe adapter, for example.
When installing the filter, note the throughflow direction, which is specified on the type
plate on the side of the lower part of the housing.
Screw the air filter housing directly onto the wall with the lower part of the housing.
Maximum thread diameter: 4 mm
Head diameter: 5 to 7 mm.
1.
A B
C
2.
Operation Guide
Installation of the Pipe System | en
A
Primary filter
B Coarse dust filter
C Fine dust filter
2018.04 | 2.0 | F.01U.130.926
97