Cleaning The Steam Wand; Cleaning The Drip Tray - Sage Duo-Temp Pro BES810 Quick Manual

CARE & CLEANING

CLEANING THE STEAM WAND

Run steam to clear milk Wipe steam wand after
from wand after texturing each use
CLEANING FILTER BASKETS
Should the fine holes in the filters become blocked
follow the steps below:
1. Place the filter into the portafilter. Run
water through the machine with the filter
and portafilter, without any ground coffee,
in place.
2. A pin can be used to clear the filter
basket holes.
3. For a thorough clean of the filters, dissolve
a cleaning tablet in hot water and soak
filters overnight.
CLEANING THE OUTER
HOUSING / CUP WARMING PLATE
The outer housing and cup warming plate can be
cleaned with a soft, damp cloth. Then polish with a
soft, dry cloth.
Do not use abrasive cleansers, pads or cloths
which can scratch the surface.

CLEANING THE DRIP TRAY

The drip tray should be removed, emptied and
cleaned at regular intervals.
Wash the drip tray with warm soapy water, using
a non-abrasive washing liquid, rinse and dry
thoroughly. The drip tray base and cover are
dishwasher safe.
CLEANING THE STORAGE TRAY
The storage tray can be removed after the drip tray
is removed then cleaned with a soft, damp cloth
(do not use abrasive cleansers, pads or cloths
which can scratch the surface).
Clean hole with pin Remove tip
STORING YOUR MACHINE
Before storing, press the POWER button to off,
turn the Control Dial to 'Standby' and unplug.
Insert all accessories into position or into the
storage tray.
Store upright. Do not place anything on top.
WARNING
Do not immerse power cord, power
plug or appliance in water or any other
liquid. The water tank should never be
removed or completely emptied during
decalcifying.
Soak tip overnight then
re-attach
11
EN