List Of I/O Signals From/To The Master Module - Mitsubishi Electric AJ65BT-RPI-10A User Manual

3.5 List of I/O Signals from/to the Master Module

The following tables provide the I/O signals transferred from/to the
master module when the monitor function is used in the AJ65BT-RPI-
10A/10B.
Refer to Chapter 5 for details of the monitor function.
Refer to Section 4.3 for the definitions of the operation indicator LEDs
used to explain the signals.
(1) Input signals (AJ65BT-RPI-10A/10B to master module)
Input Signal
Signal Name
RXn0 RC status ON indicates that the module is ready to receive data.
RXn1 R1 status
RXn2 R2 status
RXn3 R3 status
RXn4 to
——
RX(n+1)F
* Value based on the RC status signal (1 time).
(2) Output signals (Master module to AJ65BT-RPI-10A/10B)
Signal
Output Signal
Name
Ryn0 to RYnF ——
RY(n+1)0 SC ON Lights up the "SC" operation indicator LED.*
RY(n+1)1 S1 ON Lights up the "S1" operation indicator LED.*
RY(n+1)2 S2 ON Lights up the "S2" operation indicator LED.*
RY(n+1)3 S2 ON Lights up the "S3" operation indicator LED.*
RY(n+1)4 to
——
RX(n+1)F
* The RC, R1, R2 and R3 status signals of the mating module can be indicated
by the operation indicator LEDs of the own module using the sequence
program of the master station, ensuring ease of optical axis adjustment.
ON indicates that the allowance of the light receiving level is 1.5
times or higher *.
ON indicates that the allowance of the light receiving level is 2.0
times or higher *.
ON indicates that the allowance of the light receiving level is 2.5
times or higher *.
17
Description
Must not be used.
Description
Must not be used.
Must not be used.