System Configuration; Total Configuration - Mitsubishi Electric AJ65BT-RPI-10A User Manual

2. SYSTEM CONFIGURATION

2.1 Total configuration

The total configuration employed when the AJ65BT-RPI-10A/10B
module is used is as shown below.
[Segment]
*2
Master station
[Segment (1st stage)]
Remote I/O
station
[Segment (1st stage)]
Local station
[Segment (2nd stage)]
Remote I/O station
Space
transmission
*1 The A and B modules must be used in pairs.
*2 The transmission speed of each segment must be matched with that of the
master station (2.5Mbps, 625kbps, 156kbps).
*3 Up to two stages of segments may be used.
Remote I/O Repeater
station
(the A or B module)
Remote
device station
Remote I/O
station
*3
Remote I/O station
CC-Link dedicated cable
*1
Intelligent
device station
*1
Repeater
(the B or A module)
Intelligent Remote
device station device station
*1
Repeater
(the A or B module)
Repeater
(the B or A module)
5
*1
Repeater
(the A or B module)
*1
Repeater
(the B or A module)
*1
Termination resistor
(required)