Mitsubishi Electric AJ65BT-RPI-10A User Manual page 13

REVISIONS
Print date
Nov.,1999
Feb.,2001
Jun.,2003
Jul.,2005
Dec.,2006
Jun.,2007
Aug.,2007
Dec.,2011
Jul.,2014
Dec., 2016
Jun.,2018
This manual confers no industrial property rights or any rights of any other kind, nor does it
confer any patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any
problems involving industrial property rights which may occur as a result of using the contents
noted in this manual.
*The manual number is given on the bottom right of the cover.
*Manual number
IB (NA)-0800090-A
IB (NA)-0800090-B
IB (NA)-0800090-C
IB (NA)-0800090-D
IB (NA)-0800090-E
IB (NA)-0800090-F
IB (NA)-0800090-G
IB (NA)-0800090-H
IB (NA)-0800090-I
IB (NA)-0800090-J
IB (NA)-0800090-K
© 1999 MITSUBISHI ELECTRIC CORPORATION
First edition
Partial correction
Change specified torque range of Display window
mounting screw from 32 to 5.8N/cm on
Section 4.2.1(1)
Partial correction
SAFETY PRECAUTIONS, About the Manuals,
Chapter 1, Section 1.3, 2.2, 3.1, 3.2, 4.2.1, 4.6
Addition
Conformation to the EMC Directive and Low
Voltage Instruction
Partial correction
SAFETY PRECAUTIONS
Partial correction
SAFETY PRECAUTIONS, About the Manuals,
Section 1.3, 2.2, 3.1, 3.2, 3.4, 4.2.1
Partial correction
Section 4.3,Contact address (Back cover)
Partial correction
Section 4.3
Addition
CONDITIONS OF USE FOR THE PRODUCT
Partial correction
SAFETY PRECAUTIONS, About the Manuals,
COMPLIANCE WITH EMC AND LOW VOLTAGE
DIRECTIVES, Section 3.1, 4.2.1, 4.5
Partial correction
About the Manuals, Section 1.3, 2.2, 4.3
Addition
SAFETY PRECAUTIONS (French)
Partial correction
Section 3.1, 4.2.1, 4.5
Descriptions are revised due to compliance with
the Chinese standardized law.
A-12
Revision