Epever ET4415BND User Manual page 27

<1>Work Log
<2>Alarm Log
<1>Work Log
<2>Alarm Log
Press to enter the Log Info interface when the inverse cursor point to item.
Press button to exit. Work Log and Alarm Log could be browsed in this
interface, the operation is as follows:
Press to enter the Work Log or Alarm Log interface respectively when the
item is chosen in inverse. Press
button to move the cursor between the time parameters and data bit. Use
button to modify the value and set the period of log for browse. When
the period is set, press
Log Number, time, the voltage and current of battery are included in every
work log item and are shown in the Work Log interface.
Warning event sequence number, warning event, start or end time, the fault
status and values are all included in every alarm Log item and are shown in the
Alarm Log interface.

Clock Set
The interface of Clock Set is shown as follow:
Press to enter the Clock Set interface when the inverse cursor point to
Clock Set item. Press
Date and Time can be adjusted in this interface. Press
user password and then Date and Time could be adjusted. The format of date
is YYYY-MM-DD; the one of time is HH-MM-SS. When the set is over, press
Work Log Query
From 2012-01-01
To 2012-06-08
Total：79
Alarm Log Query
From 2012-01-01
To 2012-06-08
Total：10
again to enter the Edit Mode. Use
to enter the corresponding details.
Clock Set
Jan-01-2014
17:12:28
button to exit.
23
No. 1/79
2012-01-01 00:00
Batt Volt 13.3V
Batt Cur 0.0A
No. 1/10
Batt OVD/Begin
2012-01-04 14:20
Para 17.20V
and input the 6 digit
or