Wiring - Epever ET4415BND User Manual

 150mm of clearance is required around the controller for proper air flow.

Secure the controller in place using proper mounting screws.

2.4 Wiring

※Please remove the terminal protective cover before wiring.
CAUTION: The following connection order is recommended for
optimal safety.
CAUTION: Do not entangle all wiring together. Communication
cable and power wires should be as far as possible to avoid
interfering communication signal transmission.
CAUTION: The controller is a negative ground controller. Any
negative connection of solar or battery can be earth grounded as
required.
CAUTION: For mobile applications, be very certain that all wirings
are connected securely. Use cable clamps to prevent cables from
swaying when the vehicle is in motion. Unsecured cables create
loose and resistive connections which may lead to excessive
heating and/or fire.
ATTENTION: Un ordre de connexion recommandé a été pré vu
pour une sécurité maximum pendant l'installation.
13