Epever ET4415BND User Manual page 26

Press to enter corresponding interface.

Monitor
There are 9 interfaces for monitoring, as shown below:
Batt Volt.
12.4V
Batt Cur.
2.2A
Batt Day'Max
13.5V
Batt Day'Min
11.7V
Press to enter the monitoring interface when the inverse cursor point to
monitor item.
The parameters in monitoring interface are only for browse.
Press button to browse the parameters interfaces in turns. There are 5
battery status: Normal, UVW(Under voltage warning), LVD(Low voltage
disconnect), Over Voltage, Over Temperature and 4 charging stages: no
charging, equalized, boost, float.
Log Info
There are two items of log record as shown blew.
1.Monitoring
2.Log Info
3.Clock Set
4.Local Para Set
Local Temp
25.5 º C
Batt State
5.Control Para
6.Sys Password
7.Default Set
8.Dev Msg
Batt Temp
21º C
Temp Coefficient
-3mV/º C/2V
Normal
22
Total Generated
7.50kWh
Generated Energy
1.5kWh/D
PV Power
85.5W
Charge State
Float
PV Volt.
25.4V