Table of Contents
Advertisement
Technical Specification
Software Components
The software package stored on a standard Transas CD, is designed for supporting
the Radar Integrator board’s operation and enables control of this unit’s operating
modes, reception, processing, and transmission of a radar picture as well as
the extraction and tracking of radar targets.
The package includes:
•
RIB2 driver
•
A set of libraries with configuration file:
•
Testing program: (
(
The installation package enables the necessary software to be copied into the folder
determined by the user, ensures the necessary registration of software by
the operating system, and runs the configuring utility which provides the package’s
referencing to the parameters of the installed radar equipment.
The Radar Configuration utility is designed for:
•
Selecting two types of radars (named “Radar 1” and “Radar 2” respectively)
which can be connected to the system if Interswitch unit is available;
•
Enabling additional manual adjustment of the system parameters used when
the customer has radar whose type is not on the radar type selection menu, and
for taking into account parameters of particular radar, such as the beam width,
bearing, and distance offsets.
The Test Radar utility is a facility for testing the previously installed and configured
“Radar processor libraries” package jointly with the Radar Integrator board.
The program ensures the formation of a radar picture and also displays the results
of the signal and tracked targets processing.
Description of the Delivery Set
The Radar Integrator Board delivery set includes the components listed in table below.
N
Item
1
Radar Processor board with a bracket
2
High Frequency box
3
Low Frequency box
4
Extension cable DB25 – DB25, 1 m in length
5
Coaxial cable with BNC type connector on one end, 1 m in length
6
RJ45 connector
7
Jumper
8
Documentation (Radar Integrator User and Installation Manuals (B5 format))
9
LF box installation kit:
Velcro type connection;
Screw
10
HF box installation kit:
Velcro type connection
Weight and Dimensions
Weight of the HF box: 0.15 kg.
Weight of the LF box: 0.3 kg.
Overall and installation dimensions are specified in Fig. 103–51.
346
NAVI-SAILOR 4000/4100 ECDIS (v. 2.00.009). Installation Guide
– for Windows XP;
,
;
System Configuration Utility\Radar\General
).
,
,
, “Test Radar” button)
Quality
1
1
1
1
2
2
10
1 set
2
4
1
Advertisement
Table of Contents
