Transas NAVI-SAILOR 4100 ECDIS Installation Manual page 109

Table of Contents

Advertisement

On this page, all the checkboxes are checked by default. Uncheck the relevant
checkboxes for performing the following operations when handling S-57 format charts:
Confirm delete
– to delete charts without additional warning;
Confirm install old
– to install new charts automatically on the charts already installed;
By default, the next checkboxes
unchecked, and in this case updating of ENC charts will be accepted automatically.
Manual accept
– to install the successive updating automatically, without prompt
for accepting previous updating;
Do not accept last
– to accept automatically the latest updating (if the checkbox
is checked, the latest updating should be accepted on “ENC” page of
“Ship Collection” panel);
Use catalogue for install
during the chart installation;
Use catalogue for update
during the chart updating;
Confirm deleting update
A
!
TTENTION
Manual Accept
– file with chart catalogue (
– file with chart catalogue (
– to confirm automatically the deleting updating.
Charts Installation and Chart Assistant Adjustment
and
Do not accept last update
) will not be used
) will not be used
Chapter 2. System Settings
are
107

Advertisement

Table of Contents
loading

This manual is also suitable for:

Navi-sailor 4000 ecdis

Table of Contents