Headlamp Adjustment - Ikco DONG FENG S30 2016 Owner's Manual

Headlamp adjustment

Adjust the beam angle of the vehicle
headlamp according to the vehicle load,
so as to obtain the optimal lighting effect.
Headlamp beam height adjusting
knob
When the ignition switch is at "ON"
position and the headlamp is turned on,
the headlamp beam control will come
into effect, so as to adjust the headlamp
optical axis according to the driving
situation.
If there is no heavy load/luggage or the
vehicle runs on the flat road, select the
common position "0".
If the number of passengers and the
load/luggage changes inside,
headlamp optical axis will be higher than
its normal position.
HEADLAMP ADJUSTMENT
If the vehicle drives on the bumps, the
headlamp may directly project to the
rearview mirror or the exterior rearview
mirror of the vehicle in front or to the
windshield of the incoming vehicle,
making other drivers fail to see clearly.
If it is necessary to adjust to the
appropriate light velocity, rotate the
corresponding switch. The larger the fi
gure indicated on the switch, the lower
the headlamp optical axis is.
Select the switch position with reference
to the following examples:
Switch Load in
position trunk
0 No load
0 No load
1 No load
2 Full load
3 Full load
the
1
Number of
passengers
Driver only
Front seats: 2
Front seats: 2
Rear seats: 3
Front seats: 2
Rear seats: 3
Driver only
87