Ikco DONG FENG S30 2016 Owner's Manual page 55

CHILD SAFETY
1
ISO FIX child safety seat anchorage
On S30 model, the child seat upper
anchorage supports are located on
two sides of the rear shelf; four lower
anchorage supports for child seat are
provided under the ISO FIX mark on the
rear seat backrest.
The anchorage support is used to install
the top strap of the child safety seat.
Flip up the anchorage support cover
backwards to expose the support.
54
After adjusting the rear seat headrest
height, have the top strap of the child
safety seat threaded through the middle
part between two support legs of the
rear headrest and hook it firmly to the
anchorage supports; then tension the
top strap and secure the child safety
seat.
Adjust the rear seat headrest to the
lowest position.
Warning:
After installation, push the child seat to
different directions to confirm that it is
firmly secured. The anchorage can only
stand the load produced by the correctly
installed child seat and cannot be used
to secure other objects.
On H30 and H30 CROSS models, the
child seat anchorage supports are
located at the back of the rear seat
backrest; four lower anchorage supports
are provided for child seat under the ISO
FIX mark on the rear seat backrest.
Unlock the rear seat backrest, turn over
the backrest appropriately and adjust
the headrest height; have the top strap
of the child safety seat threaded through
the middle part between two support
legs of the headrest and hook it firmly
to the anchorage supports; afterwards,
push the rear seat backrest back to the
original position and confirm that it is
locked securely. Tension the top strap
and secure the child safety seat.
Adjust the rear seat headrest to the
lowest position.