Ikco DONG FENG S30 2016 Owner's Manual page 46

- The safety belt shall be kept clean. If
contaminated, its automatic retraction
function will be impeded.
- The guiding device for latch plate shall
not be barred by papers or similar
products, or else, the latch plate
cannot be engaged correctly.
- Check the safety belt at any time. If
the safety belt webbing, connections,
automatic retraction device or locking
device is damaged, always have
the safety belt replaced either at
Dongfeng Franchise Store
.
authorised representatives
- The safety belt should not be removed
or modifi ed in any method or manner.
Do not try to repair the safety belt by
yourself.
- The safety belt used during accidents
and deformed due to tensioning
must be replaced either at Dongfeng
Franchise Store
.
representatives
In addition, check the safety belt
regularly in any other cases.
- The safety belt shall not pass through
the sharp or fragile matters (such as
glasses and ball-point pen), or else,
personal injury will be caused.
- The excessively loose cloth (such as
or IKCO
overcoat out of the male sack coat)
will impede the function of safety belt.
The protection of safety belt can play
to the full as only as the correct seat
position is taken.
- Always put your feet on the footrest
space during driving instead of on
instrument panel or seat cushion in
any case.
Warning:
- Always fasten your safety belt before
each driving. This requirement is
equally applied to the rear seats.
or IKCO authorised - The protection of safety belt can play to
the full as long as the belt is fastened
correctly.
- Ensure that the safety belt is fastened
as per the description in this chapter.
Wearing safety belt incorrectly will
significantly increase the risk of injury
during accident.
- The safety belt cannot be clamped,
bent or abraded on the sharp part.
- Do not share the same safety belt
with another people (even child).
Such a kind of safety belt application
will endanger the child sitting on your
knees.
SAFETY BELT
1
45