Ikco DONG FENG S30 2016 Owner's Manual page 149

WHEEL REPLACEMENT
Driver's tool
5
Warning triangle
Jack handle
Jack
Wheel wrench
Removable towing eye
148
Remove the wheel
1. Park the vehicle on the level hard
ground stably; hold the parking brake
firmly to stop the engine, and shift the
brake to 1st gear or reverse gear (or
shift the automatic transmission to P),
turn on the hazard warning lamp and
ask all passengers to get off the vehicle.
Place a cushion block behind the wheel
diagonally opposite to the wheel which
is required to be replaced;
2. Remove the spare tyre;
3. Take out the jack from the trunk, and
place it near the wheel which is required
to be replaced, with the jack head groove
aligned with the lifting point, lift the jack
by a wheel wrench in combination with
the jack handle until the jack is loaded,
but the wheel should not be off the
ground;
4. Loosen the 4 wheel bolts with the
wheel wrench diagonally but not fully
unscrew them;
5. Lift the jack again until the wheel is off
the ground for several centimeters;
6. Unscrew the wheel bolts to replace
the wheel.
Note:
Jack is specially designed for the vehicle
wheel and cannot be used for other
purposes.