Gabarron PH-125 Plus Installation Instructions And User Manual page 5

Ph plus series smart panel convector heater
Table of Contents

Advertisement

EN
SWITCHING ON THE PANEL HEATER
Once the heater is connected to a main supply, switch on the heater by setting the switch marked I-O positioned at the rigth
side of the panel heater to "I". The off position is marked "O".
SETTING THE TIME
Press the
key more than two seconds. The display will show the time intermittently. Set the hours by pressing
and press the
. Set the minutes the same way. Press once more the
set the time press the
FROST PROTECTION MODE
With this mode on, if the room temperature drops below 3ºC the heater will connect itself automatically.
If the display shows the time the panel heater is in frost protection mode. Press the
(time is shown in the display) to standard mode (temperature is shown in the display) and vice versa.
PROGRAMMING THE PANEL HEATER
The panel heater operates in programming mode maintaining the SUN, MOON or
program. If the display shows the time, the panel heater is in frost protection mode.
SUN, MOON AND
The electronic programmer is able to handle three temperature levels during the 24h of the day.
Press the
key to set the SUN temperature. The display will show the SUN temperature value blinking.
Set the SUN temperature value by means of the
time the heater is in frost protection mode. Press the
to standard mode (temperature is shown in the display) and vice versa.
Repeat the above steps with the key
The
temperature level is 3ºC and it is a fix value. This temperature level can be used as off selection when setting the
temperatures during curtain times of the day.
SUN, MOON, or
DAILY PROGRAMMES
It is basic to visualize the day split into 48 intervals of 30 minutes each; SUN, MOON, or
any of them.
The default settings include daily mode so that the heater will repeat the program every day. If different programmes are
required along a week, please see the next step WEEKLY PROGRAMMES. To check a programme or to make a new one,
follow these steps:
Press the PRG key and the display will show 00:00 intermittently. Press one of the three keys
MOON or OFF (frost protection) from 00:00h to 00:30h. If SUN or MOON temperatures are selected the relevant luminous
indicator will be lit. If OFF temperature
key and repeat the above steps.
TEMPERATURES
to set the MOON temperature.
temperatures can be allocated to any of the 48 intervals of 30 minutes of the day.
is selected both luminous indicators will be off.
key to store the time. If at any time it is necessary to
+
o
keys and press the
key to shift from frost protection mode (time is shown in the display)
4
key to shift from frost protection mode
temperatures as per the introduced
key to store the value. If the display shows the
temperatures can be allocated to
+
-
and
keys
to allocate SUN,

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ph-200 plusPh-075 plusPh-150 plus

Table of Contents