Gabarron PH-125 Plus Installation Instructions And User Manual page 4

Ph plus series smart panel convector heater
Table of Contents

Advertisement

EN
3.- USING THE PANEL HEATER
SUN indicator
SUN key:
Press once to see the SUN
temperature value.
Press + or – keys to modify the
value.
MOON key:
Press once to see the MOON
temperature value. Press + or
– keys to modify the value.
MOON indicator
Press this key for more than
two seconds to set the time or
day of the week.
DIGITAL CONTROL WITH DAILY AND WEEKLY PROGRAMMING
Main switch:
All models are equipped with one switch on the right surface allowing the panel
heater disconnection.
Ph Plus panel heaters have built in an electronic thermostat with a sensibility of 0.1 ºC. It is
possible to set temperatures with an accuracy of 0.5ºC.
The daily or weekly programmer (selectable) allows you to allocate three different temperature
levels to any of the 48 intervals of 30 minutes of the day.
3
Digital DISPLAY:
It shows the time, temperature
and other messages.
Heating indicator:
This small dot will be lit when
the heater is consuming energy.
Frost protection key:
If the display shows the time the
heater is in frost protection mode.
Press this key to shift from frost
protection mode to standard mode
and vice versa.
Key "+":
It increases the values.
Key "-":
It decreases the values.
PRG key:
Allows you to create check or
modify programs.
Move forward with + or – keys
and allocate the SUN, MOON, or
temperature to any of the 48
intervals of 30 minutes of the day
by means of the relevant key.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ph-200 plusPh-075 plusPh-150 plus

Table of Contents