Table of Contents
Advertisement
Making telephone calls with the Pocket PC
Using voice dialling (Voice Commander)
Voice dialling
Voice Commander
With the aid of the Voice Commander speech recognition application you can save a voice identifier
for each of your contacts. Once this has been set up, you only need to say the voice identifier in the
Voice Commander application and your Pocket PC will automatically dial the contact's number.
For best results with the Voice Commander system we recommend that you
assign the Voice Commander application to one of the application keys –
see
"Configuring the application buttons", Page
Making a call via Voice Commander
► Select Start – Programs – Voice Commander.
Voice Commander is opened. You are prompted to speak a command.
► Say "call <voice identifier>", e.g. "call test", to dial the contact's telephone
number with the corresponding voice identifier.
Once Voice Commander has been able to assign your text to a command
you will be asked to confirm it.
► If the command has been correctly recognised say "yes".
The phone number of the contact is dialled.
Detailed information on the use of the Voice Commander system can be
found in the help file on your Pocket PC.
Speed dial function
Speed dialling
You can assign speed dial numbers to up to 99 contacts. These speed dial numbers
allow you to dial required telephone numbers more quickly.
Programming the speed dial function
► Click on Start – Contacts.
Your stored contacts are displayed.
► Tap the required contact.
The details for the selected contact are then shown.
► Choose an available speed dial number, e.g. "29".
► Confirm with OK.
The speed dial number for your contact has now been saved.
Making a call via the speed dial number
From the Today screen or the telephone application:
► press and hold the speed dial number assigned to the desired number.
The connection is established.
30
14.
A26391-K182-Z120-1-7619, edition 2
Advertisement
Table of Contents
