Holding A Call; Making A Conference Call; Setting Up A Conference Call; Disconnecting All Connections From The Conference Call - Fujitsu LOOX T810 Manual

Making telephone calls with the Pocket PC

Holding a call

Hold Call
This function allows you to put a call on hold without disconnecting it. In this case the person at
the other end of the line will hear music while he or she is on hold. In the mean time you can for
example dial a second telephone number and set up a second telephone connection.
► Press the Answer button.
The online keyboard for telephony is displayed.
► Enter the telephone number.
► Press the Answer button.
The connection is established.
► TapHold.
The call is put on hold. While it is on hold, the person at the other end of the line hears music.
► If you would like to set up a second telephone connection, touch the keyboard
in the footer and dial the required number.
► To terminate the second call tap End.
► Touch Swap to speak to the first person again.
You can also combine two held calls into a conference call – see
"Making a conference call", Page

Making a conference call

Conference call
You have established two phone connections, see
would like to combine these two calls to a conference call.

Setting up a conference call

► Tap Menu – Conference.
All connections are combined to a conference call.

Disconnecting all connections from the conference call

► Tap on End.
All connections are disconnected.

Disconnecting selected connections

► Tap Menu – Private.
All active connections are displayed.
► Tap on the connection you would like to disconnect.
► Tap on End.
The selected connection is terminated. All other connections remain connected.
32
32.
"Holding a call", Page
A26391-K182-Z120-1-7619, edition 2
32. You