Table of Contents
Advertisement
User data dialogue
If additional data is required in order to establish the connection to the required target network,
e.g. GSM, VPN, WLAN, WPA, PEAP, then these will be requested after the "Connect" softkey
has been pressed and before the actual connection is established.
This may be the sort of data given below depending on the type of connection:
•
User name
•
Password
•
Domain
•
RSA ID PIN
•
RSA ID Token
GPRS/UMTS provider selection
If E2C determines while establishing a connection with a GPRS/UMTS network that you are not in
your home country, E2C attempts to read out the home provider of your mobile phone to establish a
GPRS/UMTS connection with the related settings. The "GPRS/UMTS provider selection" dialogue
will appear if E2C is unable to read your mobile phone's home provider. Here you can provide
E2C with the missing data required to automatically establish the GPRS/UMTS connection. E2C
requires information on the country and the home provider of your mobile phone from you.
A26391-K182-Z120-1-7619, edition 2
Getting started
21
Advertisement
Table of Contents
