Connecting The Mains Adapter And Charging The Battery; Starting Up Your Pocket Pc For The First Time; Calibrating The Screen - Fujitsu LOOX T810 Manual

Connecting the mains adapter and charg-
ing the battery
Mains adapter Preparation for use
Pay attention to the relevant safety notes provided in the "Important notes" chapter.
Information on connecting the mains adapter and charging the battery can be found in the
the Pocket PC", Page 39
Starting up your Pocket PC for the first time
Preparation for use
Pocket PC Stylus First start-up
► Press the End button to switch on the Pocket PC (1).
The Pocket PC is switched on.
► Pull out the stylus in the direction of the arrow (2).

Calibrating the screen

The display of your Pocket PC is a touchscreen. To ensure that the touchscreen of
your Pocket PC reacts correctly when touched with the pen, you will be asked to
calibrate the touchscreen after the initial start-up.
Calibrating the screen Preparation for use
► With the stylus, touch the centre of the cross hairs that appear on the screen.
► You will need to repeat this procedure several times, whereby the cross hairs will
appear at different locations on the screen each time.
► Follow the on-screen instructions.
A26391-K182-Z120-1-7619, edition 2
chapter in the section
2
"Charging the battery", Page
1
Getting started
"Operating
46.
19