Troubleshooting; What To Do If - John Lewis JLFSEC612 User Manual

Troubleshooting

Warning! Refer to Safety
chapters.

What to do if...

Problem
You cannot activate the appliance.
You cannot activate the appliance.
You cannot activate or operate the
hob.
You cannot activate or operate the
hob.
You cannot activate or operate the
hob.
An acoustic signal sounds and the
hob deactivates.
An acoustic signal sounds when the
hob is deactivated.
The hob deactivates.
Residual heat indicator does not
come on.
Automatic Heat Up function does
not operate.
40
Possible cause
The appliance is not connected to
an electrical supply or it is connec-
ted incorrectly.
The fuse is blown.
You touched 2 or more sensor
fields at the same time.
STOP+GO function operates.
There is water or fat stains on the
control panel.
You put something on one or more
sensor fields.
You put something on the sensor
field .
The zone is not hot because it op-
erated only for a short time.
The zone is hot.
Remedy
Check if the appliance is correctly
connected to the electrical supply.
Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
Touch only one sensor field.
Refer to "Hob - Daily use" chapter.
Clean the control panel.
Remove the object from the sensor
fields.
Remove the object from the sensor
field.
If the zone operated sufficiently
long to be hot, speak to an Author-
ised Service Centre.
Let the zone become sufficiently
cool.
Cooker User Manual