Before First Use; Initial Cleaning; Using The Sensor Fields; Setting The Time - John Lewis JLFSEC612 User Manual

Before first use

Warning! Refer to Safety
chapters.

Initial Cleaning

Remove all accessories and removable shelf
supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance and the accessories before first
use.
Put the accessories and the removable shelf
supports back to their initial position.

Using the sensor fields

To activate a function touch and hold the selected
symbol on the display for minimum 1 second.

Setting the time

You must set the time before you operate the
oven.
When you connect the appliance to the
electrical supply or after a power cut, the
indicator for the Time function flashes.
Press the or to set the correct time.
After approximately five seconds, the flashing
stops and the display shows the time of day you
set.
You can only change the time if:
• The child safety device is not on.
• None of the clock functions Duration
End is set.
• No oven function is set.
12

Preheating

Preheat the empty appliance to burn off the
remaining grease.
Preheat the two ovens. Heat up
one oven at a time.
Set the functions listed below, if
applicable.
1. Set the function
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
temperature.
4. Let the appliance operate for 15 minutes.
5. Set the function
temperature.
6. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow in the room
is sufficient.
or
and the maximum
and set the maximum
and set the maximum
Cooker User Manual