Table of Contents
Advertisement
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking zones
do not operate. The heat setting display shows
.
To activate the function: touch
or
of the timer to set the time. When the
time comes to an end, the sound operates and
00 flashes.
To stop the sound: touch
To deactivate the function: touch
then touch
. The remaining time counts back
to 00
The function has no effect on the
operation of the cooking zones.
STOP+GO
This function sets all cooking zones that operate
to the lowest heat setting.
When the function operates, you cannot change
the heat setting.
The function does not stop the timer functions.
To activate the function: touch
comes on.
To deactivate the function: touch
previous heat setting comes on.
Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental change
of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
16
. Touch
.
and
.
. The
.
. The
When you deactivate the hob, you
also deactivate this function.
The Child Safety Device
This function prevents an accidental operation
of the hob.
To activate the function: activate the hob
with
. Do not set the heat setting. Touch
for 4 seconds.
comes on. Deactivate the hob
with
.
To deactivate the function: activate the hob
with
. Do not set the heat setting. Touch
for 4 seconds.
comes on. Deactivate the hob
with
.
To override the function for only one
cooking time: activate the hob with
comes on. Touch
heat setting in 10 seconds. You can operate
the hob. When you deactivate the hob with
the function operates again.
Power management function
• All cooking zones are connected as on the
illustration.
• The hob and both ovens are connected to one
phase.
• The phase has a maximum electricity load.
• The function divides the power within the
appliance. The oven is more important than the
hob.
• The function activates when the total electricity
load in the appliance is exceeded.
• The function decreases the power on the
cooking zones to prevent a circuit overload.
• The heat setting display of the reduced zones
changes between two levels.
.
for 4 seconds. Set the
Cooker User Manual
Advertisement
Table of Contents
